The display features an IPS LCD 6.55 inches screen that comes with a resolution of 720 x 1612 pixels while the PPI density is 270. The smartphone is powered by Qualcomm SM6225 Snapdragon 680 4G Octa-core processor while the GPU is Adreno 610.
It is built with a glass front, plastic frame, and plastic back. It supports IP5X dustproof, IPX4 waterproof and Dual SIM. It is packed with 8 GB RAM with 128 GB internal storage option. The smartphone runs on Android 12 + Funtouch 12 operating system.
The smartphone features a dual camera on the rear side that consists of 50 MP (wide) + 2 MP (macro) while on the front there is a single camera of 8 MP (wide).
The device is fueled with a non-removable Li-Po 5000 mAh battery + Fast charging 18W + Reverse charging that comes in various color options such as Dark Blue and Yellow Green. The dimension of the device is 164.3 x 76.1 x 8.4 mm and it weighs 192 grams.
vivo Y22s features a headphone Jack, A-GPS, GLONASS, GALILEO, BDS, and Type-C 2.0, USB On-The-Go. The sensors include as side-mounted fingerprint, accelerometer, proximity, and compass.ch as accelerometer and proximity. The dimension of the device is 163.8 x 75.7 x 8.4 mm and it weighs 185 grams. It is built with a glass front, plastic frame, and plastic back. It features IP54, dust and splash resistant.
Stock ROM for Vivo Y22S (PD2228)
DOWNLOAD:
PD2228KF:
PD2228JF:
PD2228F:
PD2228DF:
PD2228CF:
HOW TO
- Driver & tools: QPST_2.7.496.1.zip (60.31M) | OneDrive | MediaFire | Backup
Step 1: Download and install the Driver and Tool above. Then open QPST tool in Start Menu or from the folder C:\Program Files\Qualcomm\QPST\bin
Step 2: Turn off the phone (Remove the battery if possible, then reinsert the battery), hold the VOLUME UP key and plug in the USB cable to connect to the computer (to enter EDL mode).
Step 3 : Open QPST Configuration
Step 4 : After opening QPST Configuration , select the “ Port ” tab and select the Port the phone is connecting to.
Step 5 : On the menu bar, select Start Clients > Software Download
Step 6 : The QPST Software Download window appears.
Step 7 : Click on the “ Browse… ” button in the Phone Image section and find the file (.hex) in the ROM folder (unzipped)
Step 8 : Continue to click the “ Browse… ” button in the Boot Image section and find the “ BOOT_LOADER.HEX ” file (in the ROM folder).
Step 9 : Start the ROM flash process by clicking the “ Start ” button
Step 10 : When the “green bar” appears below, the ROM flashing process is complete.
Disconnect your phone from your computer and open it to see the results. Thanks
