ROM / FIRMWAREVIVO

Stock ROM for Vivo iQOO Neo 7 SE (PD2238F)

The display features an AMOLED screen clocked at 120Hz that has 388 PPI density along with HDR10. The smartphone is powered by MediaTek Dimensity 8200 Octa-core 3.1 GHz processor while the GPU is Mali-G610 MC6.

It is packed with 8 GB, 12 GB, 16 GB RAM with 128 GB, 256 GB, 512 GB internal storage options while there is no card slot to expand the memory further. The smartphone features a triple camera on the rear side that consists of 64 MP (wide) + 2 MP (macro) + 2 MP (depth) while on the front there is a single camera of 16 MP (wide).

The device is fueled with a non-removable Li-Po 5000 mAh battery + Fast charging 120W. It is available in three colors: Blue, Gray, Gradient. Vivo iQOO Neo 7 SE runs on the Android 13 + Origin OS 3 operating system.

The smartphone features Bluetooth 5.3, GPS, GLONASS, GALILEO, BDS, QZSS and Type-C 2.0, USB On-The-Go. The sensors such as an optical under display fingerprint, accelerometer, gyro, proximity, and compass.

Stock ROM for Vivo iQOO Neo 7 SE (PD2238F)

DOWNLOAD:

        HOW TO

        Step 1: Download and install the Driver and Tool above. Then open QPST tool in Start Menu or from the folder C:\Program Files\Qualcomm\QPST\bin

        Step 2: Turn off the phone (Remove the battery if possible, then reinsert the battery), hold the VOLUME UP key and plug in the USB cable to connect to the computer (to enter EDL mode).

        Step 3 : Open QPST Configuration

        Step 4 : After opening QPST Configuration , select the “ Port ” tab and select the Port the phone is connecting to.

        Step 5 : On the menu bar, select Start Clients > Software Download

        Step 6 : The QPST Software Download window appears.

        Step 7 : Click on the “ Browse… ” button in the Phone Image section and find the file (.hex) in the ROM folder (unzipped)

        Step 8 : Continue to click the “ Browse… ” button in the Boot Image section and find the “ BOOT_LOADER.HEX ” file (in the ROM folder).

        Step 9 : Start the ROM flash process by clicking the “ Start ” button

        Step 10 : When the “green bar” appears below, the ROM flashing process is complete.

        Disconnect your phone from your computer and open it to see the results. Thanks

        You may also like

        Subscribe
        Notify of
        guest

        0 Comments
        Newest
        Oldest Most Voted
        Inline Feedbacks
        View all comments