Stock ROM for Vivo Y03 (PD2327TF / PD2327QF / PD2327PF / PD2327NF / PD2327MF / PD2327JF / PD2327F)

The display size is 6.56 inches and the screen type is an AMOLED capacitive touchscreen that has 269 PPI density while the resolution of the screen is 720 x 1612 pixels.

The smartphone is powered by the Mediatek Helio G85 Octa-core processor while the GPU is Mali-G52 MC2. It is packed with 4 GB RAM and 64 GB, 128 GB internal storage options.

The smartphone features a dual camera on the rear side that consists of 13 MP (wide) + 0.08 MP (auxiliary lens) while on the front there is a 5 MP (wide) selfie camera. The device is fueled with a non-removable Li-Po 5000 battery + 15W wired. The device runs on the Android 14 + Funtouch 14 operating system.

Vivo Y03 features GPS, GALILEO, GLONASS, BDS, QZSS, loudspeaker, and sensors such as accelerometer and proximity. The dimension of the device is 163.8 x 75.7 x 8.4 mm and it weighs 185 grams. It is built with a glass front, plastic frame, and plastic back. It features IP54, dust and splash resistant.

Stock ROM for Vivo Y03 (PD2327TF / PD2327QF / PD2327PF / PD2327NF / PD2327MF / PD2327JF / PD2327F)

DOWNLOAD:

PD2327TF:

• Vivo_Y03_PD2327TF_MT6768_EX_A_14.0.10.3.W20.V000L1_150324-001.zip

PD2327QF:

• Vivo_Y03_PD2327QF_MT6768_EX_A_14.0.10.3.W20.V000L1_150324.zip

PD2327PF:

• Vivo_Y03_PD2327PF_MT6768_EX_A_14.0.10.3.W20.V000L1_150324.zip

PD2327NF:

• Vivo_Y03_PD2327NF_MT6768_EX_A_14.0.10.3.W20.V000L1_150324.zip

PD2327MF:

• Vivo_Y03_PD2327MF_MT6768_EX_A_14.0.10.3.W20.V000L1_150324.zip

PD2327JF:

• PD2327JF_MT6768_EX_A_14.0.10.3.W20.V000L1_150324.zip

PD2327F

• PD2327F_MT6768_EX_A_14.0.17.2.W30.V000L1_190724-002.zip

HOW TO

• Driver & tools: QPST_2.7.496.1.zip (60.31M) | OneDrive | MediaFire | Backup

Step 1: Download and install the Driver and Tool above. Then open QPST tool in Start Menu or from the folder C:\Program Files\Qualcomm\QPST\bin

Step 2: Turn off the phone (Remove the battery if possible, then reinsert the battery), hold the VOLUME UP key and plug in the USB cable to connect to the computer (to enter EDL mode).

Step 3 : Open QPST Configuration

Step 4 : After opening QPST Configuration , select the “ Port ” tab and select the Port the phone is connecting to.

Step 5 : On the menu bar, select Start Clients > Software Download

Step 6 : The QPST Software Download window appears.

Step 7 : Click on the “ Browse… ” button in the Phone Image section and find the file (.hex) in the ROM folder (unzipped)

Step 8 : Continue to click the “ Browse… ” button in the Boot Image section and find the “ BOOT_LOADER.HEX ” file (in the ROM folder).

Step 9 : Start the ROM flash process by clicking the “ Start ” button

Step 10 : When the “green bar” appears below, the ROM flashing process is complete.

Disconnect your phone from your computer and open it to see the results. Thanks