NOKIAROM / FIRMWARE

Stock ROM for Nokia 9 PureView AOP (TA-1082-1087-1094)

The smartphone is expected to release in India this month. Nokia 9 PureView comes with a big screen of 5.99 inch display.

The phone is powered by Qualcomm Snapdragon 845 SDM845, 64-Bit Processor and Qualcomm Adreno 630 GPU. The screen is protected with Corning Gorilla Glass 5.

The phone has powerful battery of Non-Removable 3,320 mAh Lithium-Poly with Quick 18W & Wireless Charging 10W.

The smartphone runs on Android 9.0 Pie (Android One) operating system and the dimension is 155 mm x 75 mm x 8 mm and it weighs 172 Grams (with Battery).

Prerequisites & Preparation

  • Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
  • Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
  • USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

File TypeFirmware / BuildRegion / ModelOS VersionDownload Link
Stock ROMAOP-422A-0-00CN-B03.nb0.rarGlobal / GeneralGoogle Drive
Stock ROMAOP-427C-0-00WW-B01.nb0.rarGlobal / GeneralGoogle Drive
Stock ROMAOP-422C-0-00WW-B01.nb0.rarGlobal / GeneralGoogle Drive
Stock ROMAOP-525A-0-00WW-B03.nb0.rarGlobal / GeneralGoogle Drive
Stock ROMAOP-1720-0-00WW-A02_QPST.rarGlobal / GeneralGoogle Drive
Stock ROMAOP-419A-0-00WW-B01_QPST.rarGlobal / GeneralGoogle Drive
Stock ROMQPSTGlobal / GeneralGoogle Drive

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Nokia device using Online Service Tool (OST LA), follow these steps:

  1. Download and install the Nokia USB Drivers on your computer.
  2. Download and install the Online Service Tool (OST LA) (preferably the patched version).
  3. Extract the downloaded stock ROM firmware (usually in .nb0 or .mlf format).
  4. Launch OnlineUpdateTool.exe from the installation directory (typically C:\Program Files (x86)\OST LA).
  5. Power off your device completely. Hold the Volume Down button and connect the device to the computer via USB cable to enter Download Mode (Fastboot Mode).
  6. In OST LA, click the browse button (…) and select the extracted firmware file (.nb0 or .mlf).
  7. Click the Next button.
  8. Wait for the flashing process to complete. The device will automatically reboot once finished.

You may also like

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted