The smartphone is powered by Qualcomm SM8550-AB Snapdragon 8 Gen 2 processor + Adreno 740 GPU. The device runs on Android 13 + ColorOS 13.2 operating system.
The device is packed with 12 GB, 16 GB RAM with 512 GB, 1 TB internal storage options. It is built with Glass front (Ceramic Guard) (folded), plastic front (unfolded), glass back or eco leather back, and aluminum frame.
OPPO Find N3 comes with a triple-camera setup: 48 MP (wide) + 64 MP (telephoto) + 48 MP (ultrawide) while on the front, there is a dual camera setup: 20 MP (ultrawide) + Cover camera: 32 MP (ultrawide). It is available in various colors including Black, Green, Gold, and Red.
The size of the display is 7.82 inches Foldable LTPO3 OLED while the screen resolution is 2268 x 2440 pixels and it also supports Dual SIM (Nano-SIM, dual stand-by). It is fueled with a 4805 mAh battery + 67W wired, PD, 1-35% in 10 min + Reverse wired. The sensors include side-mounted fingerprint, accelerometer, dual gyro, proximity, compass, and color spectrum.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | 230913 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your OPPO device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
