The smartphone is powered by Qualcomm SM8650-AB Snapdragon 8 Gen 3 processor and the operating system is Android 14 + ColorOS 14. The device is packed with 12 GB, 16 GB RAM with 256 GB, and 512 GB internal storage options.
The device consists of a quad-camera: 50 MP (wide) + 50 MP (periscope telephoto) + 50 MP (periscope telephoto) + 50 MP (ultrawide) while on the front there is 32 MP (wide).
The size of the display is 6.82 inches LTPO AMOLED and features 1B colors, 120Hz, Dolby Vision, HDR10+ alongside Corning Gorilla Glass Victus 2. The screen resolution is 1440 x 3168 pixels.
Oppo Find X7 Ultra is fueled with a non-removable Li-Po 5000 mAh battery + 100W wired
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | 231221 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your OPPO device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
