The smartphone features a big display of 6.7 inches with an AMOLED touchscreen. The resolution is 1080 x 2412 pixels and the screen PPI is 394. It is protected by Corning Gorilla Glass 7i.
The operating system of the device is Android 14 + Realme UI 5.0. The smartphone is powered by a Qualcomm SM7435-AB Snapdragon 7s Gen 2 Octa-core processor and an Adreno 710 GPU.
The internal storage consists of 128 GB, 256 GB, 512 GB which supports 8 GB, 12 GB RAM. Realme 13 Pro consists of a dual camera: 50 MP (wide) + 8 MP (ultrawide) while on the front, there is a single 32 MP (wide) camera that features LED flash, HDR, and panorama.
The smartphone is fueled with a non-removable Li-Po 5200 mAh battery + 45W wired, 50% in 27 min (advertised). The device comes with sensors such as an under-display, optical fingerprint accelerometer, gyro, proximity, and compass. It is available in three colors: Monet Gold, Emerald Green, and Monet Purple.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | 240803 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
