The smartphone is powered by Qualcomm SM8550-AB Snapdragon 8 Gen 2 Octa-core processor while the GPU is Adreno 740. The operating system runs on Android 13. The smartphone provides 1240 x 2772 pixels resolution and the display size of the device is 6.74 inches AMOLED. It consists of a triple-camera 50 MP (wide) + 8 MP (ultrawide) + 2 MP (macro) while on the front there is a single camera, 16 MP (wide).
The sensors include under display, optical fingerprint, accelerometer, gyro, proximity, and compass. The smartphone is available in colors like Black; other colors.
The smartphone is fueled with a non-removable Li-Po 5240 mAh + 150W wired, PD, 1-50% in 7 min (advertised). Realme GT5 features Bluetooth 5.3, GPS (L1+L2+L5), GLONASS, BDS, GALILEO, QZSS, NFC and USB Type-C 2.0.
The smartphone is integrated with 256 GB, 512 GB internal storage and 12 GB, 16 GB RAM. The dimension of the device is 163.1 x 75.4 x 8.9 mm and it weighs 205 grams. The device is built with a glass front, metal frame, and glass back
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
RMX3820
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | 230913 | RMX3820 | Android 11 | Google Drive |
RMX3823
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | 230913 | RMX3823 | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
