The smartphone is powered by Qualcomm SM8635 Snapdragon 8s Gen 3 Octa-core processor while the GPU is Adreno 735. The operating system runs on Android 14 + Realme UI 5.0. The smartphone provides 1264 x 2780 pixels resolution and the display size of the device is 6.78 inches LTPO AMOLED.
It consists of a triple camera 50 MP (wide) + MP (telephoto) + 8 MP (ultrawide) while on the front there is a single camera, 32 MP (wide). The sensors include under display, optical fingerprint, accelerometer, gyro, proximity, compass, and color spectrum. The smartphone is available in colors like Fluid Silver and Razor Green.
The smartphone is fueled with a non-removable Li-Po 5500 mAh + 120W wired, 1-50% in 10 min, 100% in 28 min (advertised).
Realme GT 6 features Bluetooth 5.4, GPS (L1+L5), GLONASS, BDS, GALILEO, QZSS, NFC and USB Type-C 2.0. The smartphone is integrated with 256 GB, 512 GB internal storage and 8 GB, 12 GB, 16 GB RAM.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Realme_GT_6_RMX3851_EX_11_14.0.1.604_EX01_240511_QPST.zip | Global / General | Android 6 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
