Here you can download the latest official Stock ROM (Firmware) files for the ZTE Redbull V5 V9180. These files are essential for repairing software issues, fixing bootloops, upgrading/downgrading the OS, or restoring your device to its factory state.
| Display | 5.0-inch IPS LCD (720 x 1280 pixels, ~294 ppi) |
| Processor | Qualcomm Snapdragon 400 (Quad-core 1.2 GHz) |
| Memory | 1GB RAM / 4GB ROM (expandable up to 32GB) |
| Operating System | Android 4.3 (Jelly Bean) |
| Battery | 2400 mAh (removable) |
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | HSXNIAID11H006 | Global / General | – | Google Drive | Download | OneDrive |
Additional Files & Tools
How to Flash Firmware / Stock ROM
To flash the stock firmware on your ZTE device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
