NOKIAROM / FIRMWARE

ROM Nokia X6 [DRG] (TA-1083-1099-1103-1116)

ROM Nokia X6 [DRG] (TA-1083-1099-1103-1116)

DOWNLOAD:

HOW TO

Step 1: Download and install the Driver and Tool above. Then open QPST tool in Start Menu or from the folder C:\Program Files\Qualcomm\QPST\bin

Step 2: Turn off the phone (Remove the battery if possible, then reinsert the battery), hold the VOLUME UP key and plug in the USB cable to connect to the computer (to enter EDL mode).

Step 3 : Open QPST Configuration

Step 4 : After opening QPST Configuration , select the “ Port ” tab and select the Port the phone is connecting to.

Step 5 : On the menu bar, select Start Clients > Software Download

Step 6 : The QPST Software Download window appears.

Step 7 : Click on the “ Browse… ” button in the Phone Image section and find the file (.hex) in the ROM folder (unzipped)

Step 8 : Continue to click the “ Browse… ” button in the Boot Image section and find the “ BOOT_LOADER.HEX ” file (in the ROM folder).

Step 9 : Start the ROM flash process by clicking the “ Start ” button

Step 10 : When the “green bar” appears below, the ROM flashing process is complete.

Disconnect your phone from your computer and open it to see the results. Thanks

You may also like

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments