OTHERROM / FIRMWARE

Stock ROM / Firmware for Itel S17 (S661)

The phone comes with a 6.60-inch touchscreen display offering a resolution of 720×1612 pixels. Itel S17 is powered by a 1.3 MHz quad-core processor. It comes with 1GB of RAM. The Itel S17 runs Android 11 (Go Edition) and is powered by a 5000mAh removable battery.

As far as the cameras are concerned, the Itel S17 on the rear packs 8-megapixel camera. The rear camera setup has autofocus. It has a single front camera setup for selfies, featuring a 5-megapixel sensor.

Itel S17 is based on Android 11 (Go Edition) and packs 32GB of inbuilt storage that can be expanded via microSD card (up to 128GB). It was launched in Sky Blue, Multicolor Green, and and Deep-Ocean Black colours.

Connectivity options on the Itel S17 include Wi-Fi and GPS. Sensors on the phone include fingerprint sensor. The Itel S17 supports face unlock.

Prerequisites & Preparation

  • Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
  • Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
  • USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

File TypeFirmware / BuildRegion / ModelOS VersionDownload Link
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive

How to Flash Firmware / Stock ROM

To flash the stock firmware on your itel device using SPD Upgrade Tool, follow these steps:

  1. Download and install the SPD USB Drivers on your computer.
  2. Download and extract the SPD Upgrade Tool (ResearchDownload).
  3. Open the tool and click on the Gear (Load Packet) icon to load the .pac firmware file.
  4. Click the Play (Start Downloading) button.
  5. Power off your device completely, hold the Volume Down (or Volume Up) button, and connect it to the computer via USB cable.
  6. Wait for the flashing process to complete and show the “Passed” status.

You may also like

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted