Stock ROM / Firmware for Itel Vision 2 / 2S (P651 / L6503)

Equipped with a 16.56 cm (6.52) HD+ IPS WaterDrop screen, you can enjoy high resolution and clear images along with vivid videos. This way, you can enjoy realistic images, an ideal aspect ratio, a wide viewing area, and high brightness.

Thanks to 2 GB of RAM, you can experience powerful and smooth performance so that you can multitask by using various applications at the same time. And, with a Big Storage Capacity of 32 GB, you can also enjoy storage expansion of up to 128 GB so that you can have various storage for your essentials.

This mobile phone has a fingerprint sensor and face unlock so that you can enjoy dual security. You can enjoy customisable security with the multifunction fingerprint sensor. And, you can amp up the protection by enabling you to unlock your phone using the speedy face unlocking feature.

The 8 MP Dual AI Camera can be used to take stellar shots of people, places, and so on. The photographer in you will be pleased with various camera modes. The portrait mode can be used to take rich portrait shots of all your loved ones.

This Itel mobile phone features a 5000 mAh battery along with AI power master so that the power is consumed intelligently. It also enhances power usage by up to 10%.

Prerequisites & Preparation

• Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
• Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
• USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

How to Flash Firmware / Stock ROM

To flash the stock firmware on your itel device using SPD Upgrade Tool, follow these steps:

1. Download and install the SPD USB Drivers on your computer.
2. Download and extract the SPD Upgrade Tool (ResearchDownload).
3. Open the tool and click on the Gear (Load Packet) icon to load the .pac firmware file.
4. Click the Play (Start Downloading) button.
5. Power off your device completely, hold the Volume Down (or Volume Up) button, and connect it to the computer via USB cable.
6. Wait for the flashing process to complete and show the “Passed” status.