Stock ROM / Firmware for Tecno Power 2 (LC8)

Tecno Spark Power 2 comes with a 7.00-inch touchscreen display offering a resolution of 720×1640 pixels at a pixel density of 480 pixels per inch (ppi) and an aspect ratio of 20.5:9. Tecno Spark Power 2 is powered by a 2GHz octa-core MediaTek Helio P22 (MT6762) processor. It comes with 4GB of RAM. The Tecno Spark Power 2 runs Android 10 and is powered by a 6000mAh battery. The Tecno Spark Power 2 supports proprietary fast charging.

As far as the cameras are concerned, the Tecno Spark Power 2 on the rear packs a 16-megapixel camera with an f/1.85 aperture. It sports a 16-megapixel camera on the front for selfies with an f/2.0 aperture.

The Tecno Spark Power 2 runs HIOS 6.1 is based on Android 10 and packs 64GB of inbuilt storage that can be expanded via microSD card (up to 256GB) with a dedicated slot. The Tecno Spark Power 2 is a dual-SIM (GSM and GSM) mobile that accepts Nano-SIM and Nano-SIM cards. The Tecno Spark Power 2 measures 174.90 x 79.60 x 9.20mm (height x width x thickness) . It was launched in Ice Jadeite and Misty Grey colours.

Connectivity options on the Tecno Spark Power 2 include Wi-Fi 802.11 b/g/n and Bluetooth v5.00. Sensors on the phone include accelerometer, ambient light sensor, proximity sensor, and fingerprint sensor.

Prerequisites & Preparation

• Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
• Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
• USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:

1. Download and install the MTK USB Drivers on your computer.
2. Download and extract the SP Flash Tool.
3. Launch Flash_tool.exe as administrator.
4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
5. Click the Download button.
6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.