OTHERROM / FIRMWARE

Stock ROM / Firmware for Tecno Spark 10 (KI5)

The smartphone runs on Android 13 + HIOS 12.6 operating system. The smartphone comes with a 6.6 inches IPS LCD capacitive touchscreen and 720 x 1612 pixels resolution.

It is built with a glass front, plastic frame, and glass back. The rear camera consists of 50 MP (wide) + other unspecified camera that comes with a Dual-LED flash. The front camera has a 8 MP (wide) sensor with a Dual-LED flash.

The sensors available in the device include side-mounted fingerprint, accelerometer, proximity and compass. The smartphone is fueled by a Non-removable Li-Ion 5000 mAh battery + 18W wired.

Tecno Spark 10 comes in different colors such as Black, Blue, and White. It features USB, FM radio, GPS, and Bluetooth. The device is packed with 4 GB RAM and 64 GB internal storage.

Prerequisites & Preparation

  • Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
  • Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
  • USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

File TypeFirmware / BuildRegion / ModelOS VersionDownload Link
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:

  1. Download and install the MTK USB Drivers on your computer.
  2. Download and extract the SP Flash Tool.
  3. Launch Flash_tool.exe as administrator.
  4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
  5. Click the Download button.
  6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
  7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.

You may also like

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted