Tecno Spark 6 flaunts a 7.00-inch touchscreen display with a resolution of 720 x 1640 pixels and an aspect ratio of 20:5:9. Tecno Spark 6 Air is powered by quad-core MediaTek Helio A22 processor and runs HIOS 6.2 based on Android 10 and packs 32GB of inbuilt storage that can be expanded via a microSD card (up to 1000GB) with a dedicated slot.
Tecno Spark 6 3GB RAM variant has also been launched in India as an addition to the already available 2GB RAM model. The phone runs Android 10 and is powered by a massive 6000mAh battery. The Tecno Spark 6 Air is a dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM cards. The Tecno Spark 6 Air measures 174.68 x 79.36 x 9.30mm (height x width x thickness). It was launched in Comet Black and Ocean Blue colors.
As far as the cameras of the phone are concerned, the Tecno Spark 6 on the rear packs a 13-megapixel primary camera with an f/1.8 aperture and a second 2-megapixel camera. The rear camera setup has auto focus. It sports an 8-megapixel camera on the front for selfies with an f/2.0 aperture. Connectivity options on the phone include Bluetooth v5.00, 3G, and 4G with active 4G on both SIM cards. Wi-Fi. A few of the sensors on the phone are accelerometer, ambient light sensor, proximity sensor and fingerprint sensor.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
