The smartphone is powered by Mediatek Dimensity 6020 Octa-core processor with Mali-G57 MC2 GPU. The device runs on Android 13 + ColorOS 13.1 operating system. The device is packed with 8 GB RAM with 128 GB internal storage, which can be increased with microSDXC.
Oppo A79 consists of a dual-camera setup: 50 MP (wide) + 2 MP (depth) sensors. On the front, there is an 8 MP (wide) camera for clicking selfies. The size of the display is 6.72 inches IPS LCD while the screen resolution is 1080 x 2400 pixels. The display is protected by Panda glass.
It supports Dual SIM and is fueled with Li-Po 5000 mAh battery + 33W wired, 51% in 30 min (advertised). The device comes in two colors: Mystery Black, Glowing Green. The sensors include a side-mounted fingerprint, accelerometer, gyro, proximity, and compass.
The dimension of the smartphone is 165.6 x 76 x 8 mm and it weighs 193 grams. Additionally, it comes with IPX4 splash resistant, and Bluetooth 5.3. It also features Wi-Fi, GPS, GALILEO, GLONASS, BDS, QZSS, and USB Type-C 2.0, OTG.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | MT6833 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your OPPO device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
