The smartphone consists of a dual-camera 64 MP (wide) + 2 MP (depth) while on the front there is a single 8 MP camera. The device comes in 6.72 inches with IPS LCD display while the resolution is 1080 x 2400 pixels. The display is protected by Corning Gorilla Glass 5.
The smartphone is fueled with a non-removable Li-Po 5000 mAh battery + 33W wired, 1-50% in 29 min (advertised).
The device supports Dual SIM (Nano-SIM, dual stand-by). The operating system of the device is Android 13 + Realme UI 4.0 and it is powered by Mediatek Dimensity 6100+ Octa-core processor while the GPU is Mali-G57 MC2. Realme 11x is packed with 6 GB, 8 GB RAM and 128 GB internal storage. It is built with a glass front, metal frame, and plastic back.
It features Bluetooth 5.2, GPS, GALILEO, GLONASS, BDS, and USB Type-C 2.0. The sensors include side-mounted fingerprint, accelerometer, gyro, proximity, and compass. The dimension of the device is 165.7 x 76 x 7.9 mm and weighs 190 grams. The smartphone is available in two colors: Midnight Black, Purple Dawn.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | A.26 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
