The smartphone comes with a big display of 6.75 inches with an IPS LCD touchscreen. The resolution is 720 x 1600 pixels and the screen PPI is 260. The operating system of the device is Android 14 + Realme UI 5.0.
The smartphone is powered by a Unisoc Tiger T612 Octa-core processor and Mali-G57 GPU.
The internal storage consists of 128 GB and 256 GB which supports 6 GB, 8 GB of RAM. The internal storage can be extended with the help of microSDXC (dedicated slot). Realme C63 consists of a dual camera: 50 MP (wide) + Auxiliary lens while on the front, there is a single 8 MP (wide) camera that features LED flash, HDR, and panorama.
The smartphone is fueled with a non-removable Li-Po 5000 mAh battery + 45W wired. The device comes with sensors such as a side-mounted fingerprint, accelerometer, gyro, proximity, and compass. It is available in two colors: Leather Blue and jade Green.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | EX01 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
