the size of the device is 6.43 inches Super AMOLED display, which provides a resolution of 1080 x 2400 pixels and the pixel density is 409 PPI. It runs on the Android 13 + Realme UI 4.0 operating system. The internal storage is 64 GB, 128 GB that comes with 6 GB, 8 GB RAM.
Realme Narzo 60 consists of a dual-camera 64 MP (wide) + 2 MP (depth) while on the front there is a single 8 MP (wide) camera. The smartphone is available in colors: Black, Orange.
The device is fueled with a non-removable Li-Po 5000 mAh battery + 33W wired, 50% in 29 min (advertised). It features Bluetooth, GPS, GALILEO, GLONASS, BDS, QZSS and USB Type-C 2.0.
The smartphone is powered by a Mediatek Dimensity 6020 Octa-core processor while GPU is Mali-G57 MC2. It also supports Dual SIM and the display is protected by Corning Gorilla Glass 5. It is built with a glass front, leather or plastic back, and plastic frame.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
RMX3771
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | 231026 | RMX3771 | Android 11 | Google Drive |
RMX3750
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | 231108 | RMX3750 | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
