The smartphone features a 6.72-inch IPS LCD with a 120Hz refresh rate and 950 nits peak brightness, offering smooth visuals and vibrant colors. It has a 1080 x 2400 pixel resolution (~396 ppi density) and is protected by ArmorShell glass. The device measures 165.7 x 76.2 x 7.9 mm and weighs 197 grams.
Built with a glass front, aluminum frame, and either a plastic or eco-leather back, Realme P3x is IP68/IP69 rated, making it resistant to dust, high-pressure water jets, and submersion up to 2 meters for 30 minutes. It also meets MIL-STD-810H standards.
Powered by the Mediatek Dimensity 6400 (6 nm) chipset, it has an octa-core 2.5 GHz CPU and Mali-G57 MC2 GPU. It runs on Android 15 with Realme UI 6.0. Storage options include 128GB with 6GB or 8GB RAM, and a microSDXC card slot using a shared SIM slot.
The dual rear camera setup features a 50 MP wide sensor and a 2 MP depth sensor, capable of 1080p@30/60fps video recording. The selfie camera supports 1080p@30fps video. Other features include 24-bit/192kHz Hi-Res audio, Wi-Fi 802.11ac, Bluetooth 5.3, and a 6000mAh battery with 45W wired and 5W reverse wired charging. Available in Midnight Blue, Stellar Pink, and Lunar Silver colors.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | MT6835 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
