The display size is 6.8 inches AMOLED and gives you a 1080 x 2400 pixels resolution. The display is protected by Corning Gorilla Glass Victus while the PPI density is ~387.
The smartphone consists of a triple-camera including 64 MP (wide) + 13 MP (ultrawide) + 2 MP camera. On the front, there is a single camera: 32 MP (wide).
The sensors of the smartphone include a optical under display fingerprint, accelerometer, gyro, proximity, compass. The smartphone is fueled by a Non-removable Li-Po 5160 mAh battery + 45W wired, 54% in 20 min, 100% in 60 min (advertised).
Tecno Phantom X2 is pack with 4 GB, 8 GB RAM and 64 GB, 128 GB, 256 GB internal storage options. The device features Bluetooth 5.3, FM Radio, GPS and USB Type-C 2.0, OTG.
The dimension of the device is 164.6 x 72.7 x 8.9 mm while it weighs 203 grams. It runs on the Android 12 + HIOS 12 operating system. The smartphone is available in colors such as Stardust Gray, Moonlight Silver.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
