The display size is 6.9 inches IPS LCD capacitive touchscreen and gives you a 1080 x 2460 pixels resolution. The smartphone consists of a triple camera including a 50 MP (wide) + 2 MP + QVGA camera.
On the front, there is a 16 MP (wide) camera. The sensors of the smartphone include a Fingerprint (side-mounted), accelerometer, and proximity. The smartphone is fueled by a Non-removable Li-Po 6000 mAh battery + Fast charging 18W.
It is packed with 8 GB RAM and 128 GB internal storage. The device features Bluetooth, FM Radio, GPS, and USB. The dimension of the device is 172.8 x 78.2 x 9.1 mm and it runs on the Android 11 + HIOS 8.0 operating system.
Tecno Pova 5G is available in a single color, Aether Black. It runs on a MediaTek MT6877 Dimensity 900 5G Octa-core processor while the GPU is Mali-G68 MC4.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
