INFINIXROM / FIRMWARE

Stock ROM for Infinix Hot S4 (X626)

Infinix has released yet another smartphone in the market called Infinix (Hot) S4. The smartphone comes with a big screen featuring 6.2 inches, 95.9 cm2 (~82.0% screen-to-body ratio), with a resolution of 720 x 1520 pixels, 24 bit. The device comes with 32 GB, 64 GB internal storage with 3 GB, 6 GB RAM respectively. The smartphone features a triple camera setup of 13 MP, PDAF + 8 MP + 2 MP on rear side of the phone.

The smartphone comes with different colors like Space gray, nebula blue, and twilight purple. The smartphone is fueled with 4000 mAh, Li-Polymer which is non-removable. The smartphone runs on Android 9.0 (Pie) operating system. The dimension of the device is 156 x 75 x 7.9 mm (6.14 x 2.95 x 0.31 in) with weight of 154 grams with battery. The device is powered by the Mediatek MT6762 Helio P22 (12 nm) Octa-core 2.0 GHz Cortex-A53 processor.

Prerequisites & Preparation

  • Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
  • Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
  • USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

File TypeFirmware / BuildRegion / ModelOS VersionDownload Link
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive
Stock ROMStock ROMGlobal / GeneralGoogle Drive

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Infinix device using SP Flash Tool, follow these steps:

  1. Download and install the MTK USB Drivers on your computer.
  2. Download and extract the SP Flash Tool.
  3. Launch Flash_tool.exe as administrator.
  4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
  5. Click the Download button.
  6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
  7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.

You may also like

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted