The smartphone comes with a 6.6 inches IPS LCD display, which provides 720 x 1612 pixels resolution. The rear camera consists of 8 MP (wide) + other unspecified camera lenses that comes with Dual-LED flash.
The front camera has a 5 MP sensor. The smartphone is fueled by a non-removable Li-Ion 5000 mAh battery + 10W wired while the phone runs on Android 12 + HIOS 12 operating system.
Tecno Pop 7 comes in two colors: Endless Black, Capri Blue. It features USB, FM radio, GPS, and Bluetooth. The device is packed with 2 GB RAM with 64 GB internal storage.
The device is built with a glass front, plastic frame, and plastic back while it supports Dual SIM (Nano-SIM, dual stand-by). The dimension of the device is 163.9 x 75.5 x 8.9 mm.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
