The smartphone comes with a big display of 6.74 inches with an IPS LCD touchscreen. The resolution is 720 x 1600 pixels and the screen PPI is 260. The operating system of the device is Android 14 + Realme UI. The smartphone is powered by a Unisoc Tiger T612 Octa-core processor and Mali-G57 GPU.
The internal storage consists of 64 GB and 128 GB which supports 6 GB of RAM. The internal storage can be extended with the help of microSDXC (dedicated slot).
Realme C61 consists of a dual camera: 50 MP (wide) + 0.08 MP (auxiliary lens) while on the front, there is a single 5 MP (wide) camera that features LED flash and panorama.
The smartphone is fueled with a non-removable Li-Po 5000 mAh battery + 15W wired. The device comes with sensors such as a side-mounted fingerprint, accelerometer, gyro, proximity, and compass. It is available in two colors: sparkling gold and dark Green.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | RMX3933export | Global / General | Android 14 | Google Drive |
| Stock ROM | RMX3933export | Global / General | Android 14 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SPD Upgrade Tool, follow these steps:
- Download and install the SPD USB Drivers on your computer.
- Download and extract the SPD Upgrade Tool (ResearchDownload).
- Open the tool and click on the Gear (Load Packet) icon to load the
.pacfirmware file. - Click the Play (Start Downloading) button.
- Power off your device completely, hold the Volume Down (or Volume Up) button, and connect it to the computer via USB cable.
- Wait for the flashing process to complete and show the “Passed” status.
