The smartphone is powered by Qualcomm SM8750-AB Snapdragon 8 Elite Octa-core processor while the GPU is Adreno 830. The operating system runs on Android 15 operating system.
The smartphone provides 1264 x 2780 pixels resolution and the display size of the device is 6.78 inches LTPO AMOLED.
It consists of a triple camera 50 MP (wide) + 50 MP (periscope telephoto) + 8 MP (ultrawide) while on the front there is a single camera, 16 MP (wide). The sensors include under-display ultrasonic, optical fingerprint, accelerometer, gyro, proximity, compass, and color spectrum. The smartphone is available in colors like Gray, White, and Orange.
The smartphone is fueled with a non-removable Li-Po 6500 mAh + 120W wired battery. Realme GT 7T features Bluetooth 5.4, GPS (L1+L5), BDS (B1I+B1c+B2a), GALILEO (E1+E5a), QZSS (L1+L5), NavIC, GLONASS, NFC and USB Type-C. The smartphone is integrated with 1 TB internal storage and 24 GB RAM. The dimension of the device is 162.5 x 76.9 x 8.6 mm and it weighs 222.8 grams.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | RMX5085 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
