The device has a 6.74-inch IPS LCD capacitive touchscreen. The device measures 167.3 x 76.7 x 7.5 mm and weighs 182 grams. The screen resolution is 1080 x 2400 pixels and runs on Android 13 + Realme UI T operating system.
Internal storage is 64 GB, 128 GB with 4 GB, 6 GB RAM options. Realme Narzo N53 includes a dual camera: 50 MP (wide) + unspecified secondary camera while on the front there is a single 8 MP (wide) camera.
The smartphone is available in Black and Gold colors. The smartphone is powered by a non-removable Li-Po 5000 mAh battery + 33W wired, 50% in 31 minutes (advertised). It has Bluetooth 5.0, GPS, GLONASS, GALILEO and USB Type-C 2.0. The device is powered by Unisoc Tiger T612 Octa-core processor while the GPU is Mali-G57.
The device is built with a glass front, plastic frame and plastic back. The device also supports Dual SIM (Nano-SIM, dual standby). Sensors include a side-mounted fingerprint, accelerometer, gyroscope, proximity sensor and compass.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Realme_Narzo_N53_RMX3761_EX_13_A.17_230517_SPD.zip | Global / General | Android 13 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SPD Upgrade Tool, follow these steps:
- Download and install the SPD USB Drivers on your computer.
- Download and extract the SPD Upgrade Tool (ResearchDownload).
- Open the tool and click on the Gear (Load Packet) icon to load the
.pacfirmware file. - Click the Play (Start Downloading) button.
- Power off your device completely, hold the Volume Down (or Volume Up) button, and connect it to the computer via USB cable.
- Wait for the flashing process to complete and show the “Passed” status.
