The device features a 6.67-inch AMOLED display with a 120Hz refresh rate and 2000 nits peak brightness, delivering a resolution of 1080 x 2400 pixels (~395 ppi density). The display supports HDR imaging for enhanced visuals. Running on Android 15 with Realme UI 6.0, it is powered by the Qualcomm Snapdragon 6 Gen 4 (4nm) chipset, an octa-core CPU (1×2.3 GHz Cortex-A720s, 3×2.2 GHz Cortex-A720s, 4×1.8 GHz Cortex-A520s), and an Adreno GPU for smooth performance.
It offers three internal storage options: 128GB 8GB RAM, 256GB 8GB RAM, and 512GB 12GB RAM, but does not have a card slot for expansion. The 50 MP main camera (f/1.8, 27mm, PDAF) includes LED flash, HDR, and panorama support, capturing 4K@30fps and 1080p@30/60/120fps video with gyro-EIS stabilization. The 16 MP front camera (f/2.4, 23mm) records at 1080p@30fps.
Realme P3 has stereo speakers, a 3.5mm headphone jack, and Hi-Res 24-bit/192kHz audio support. Connectivity options include Wi-Fi 6, Bluetooth 5.2, GPS, NFC, and an infrared port.
The 6000 mAh battery supports 45W fast charging (50% in 30 minutes). It is IP68/IP69-rated, making it dust-tight and water-resistant up to 2.5m for 30 minutes. Available colors: Gray, White, Pink.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Realme_P3_5G_RMX5070_EX_11_15.0.0.470EX01_250221_QFIL.zip | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
