The device runs on the Android 12 + Realme UI 3.0 operating system and consists of a triple camera: 50 MP (wide) + 2 MP (macro) + 2 MP (depth). On the front, there is a single 16 MP (wide) camera for clicking selfies.
It is powered by Qualcomm SM6375 Snapdragon 695 5G octa-core processor while the GPU is Adreno 619. The smartphone provides 1080 x 2412 pixels resolution and the display size of the device is 6.6 inches IPS LCD.
The sensors include a side-mounted fingerprint, accelerometer, gyro, proximity, and compass. The smartphone is available in three colors: Black, Silver, and Yellow. The smartphone is fueled with a non-removable Li-Po 5000 mAh + Fast charging 65W.
It features Bluetooth 5.1, and GPS with dual-band A-GPS, GLONASS, GALILEO, and BDS. The smartphone is integrated with 128 GB / 256 GB internal storage with 6 GB / 8 GB RAM. The dimension of the device is 164.3 x 75.6 x 8.5 mm and it weighs 195 grams.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Domestic | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using QFIL Tool, follow these steps:
- Download and install the Qualcomm USB Drivers on your computer.
- Download and install the QPST/QFIL Tool.
- Open QFIL and select Flat Build in the configuration.
- Browse and select the programmer file (usually
.elfor.mbn) from the firmware folder. - Click Load XML and select
rawprogram0.xml, then selectpatch0.xml. - Power off your device, hold the Volume Up + Volume Down buttons, and connect the USB cable to enter EDL Mode (Qualcomm HS-USB QDLoader 9008).
- Click the Download button to start the flashing process.
