The smartphone comes in a dimension of 164.7 x 76.7 x 8.5 mm and weighs 193 grams. The device supports Dual SIM (Nano-SIM, dual stand-by) and the display size is 6.67 inches IPS LCD. The resolution of the display is 1080 x 2400 pixels.
It is packed with 8 GB + 12 GB RAM with 128 GB and 256 GB internal storage options. The smartphone is powered by Qualcomm SM7325 Snapdragon 778G 5G Octa-core processor while the GPU is Adreno 642L.
vivo T1 runs on the Android 11 + OriginOS operating system. It is fueled with a non-removable Li-Po 5000 mAh battery + Fast charging 44W, 70% in 38 min (advertised). The smartphone is available in colors such as Black and Aurora.
It is integrated with sensors such as Fingerprint (side-mounted), accelerometer, gyro, proximity, and compass. The smartphone consists of triple-camera: 64 MP (wide) + 8 MP (ultrawide) + 2 MP (macro). On the front, there is a single camera consisting of 16 MP (wide).
Stock ROM for Vivo T1 (PD2201)
DOWNLOAD:
PD2201NF:
PD2201MF:
PD2201LF:
PD2201KF:
PD2201IF:
PD2201HF:
PD2201GF:
PD2201EF:
PD2201F:
- PD2201F_EX_A_12.0.11.0.W30.V000L1_LA.QSSI.12.0.R1.11.00.00.782.015_System_Split_QPST.zip
- PD2201F_EX_A_12.0.10.1.W30.V000L1_LA.QSSI.12.0.R1.11.00.00.782.015_System_Split_QPST.zip
HOW TO
- Driver & tools: QPST_2.7.496.1.zip (60.31M) | OneDrive | MediaFire | Backup
Step 1: Download and install the Driver and Tool above. Then open QPST tool in Start Menu or from the folder C:\Program Files\Qualcomm\QPST\bin
Step 2: Turn off the phone (Remove the battery if possible, then reinsert the battery), hold the VOLUME UP key and plug in the USB cable to connect to the computer (to enter EDL mode).
Step 3 : Open QPST Configuration
Step 4 : After opening QPST Configuration , select the “ Port ” tab and select the Port the phone is connecting to.
Step 5 : On the menu bar, select Start Clients > Software Download
Step 6 : The QPST Software Download window appears.
Step 7 : Click on the “ Browse… ” button in the Phone Image section and find the file (.hex) in the ROM folder (unzipped)
Step 8 : Continue to click the “ Browse… ” button in the Boot Image section and find the “ BOOT_LOADER.HEX ” file (in the ROM folder).
Step 9 : Start the ROM flash process by clicking the “ Start ” button
Step 10 : When the “green bar” appears below, the ROM flashing process is complete.
Disconnect your phone from your computer and open it to see the results. Thanks
