Stock ROM for Vivo T2 Pro (PD2285F / PD2285DF / PD2215CF / PD2215BF)

The device is packed with 4 GB, 6 GB, 8 GB RAM options while the internal storage is 128 GB. The smartphone is powered by Mediatek Dimensity 6020 Octa-core processor while the GPU is Mali-G57 MC2.

The smartphone comes in a dimension of 164.1 x 75.6 x 8.2 mm and weighs 184 grams. The device supports Hybrid Dual SIM (Nano-SIM, dual stand-by) and the display size is 6.58 inches IPS LCD. The resolution of the display is 1080 x 2408 pixels.

The device runs on the Android 13 + Funtouch 13 operating system. It is fueled with a non-removable Li-Po 5000 mAh battery + 18W wired. The smartphone is available in colors such as Glimmer Black, Aurora Gold, Marine Blue.

It is integrated with sensors such as side-mounted fingerprint, compass, accelerometer, proximity. The smartphone consists of dual-camera: 50 MP (wide) + 2 MP (macro). On the front, there is a single camera consisting of 8 MP (wide).

Stock ROM for Vivo T2 Pro (PD2285F / PD2285DF / PD2215CF / PD2215BF)

DOWNLOAD:

PD2285DF:

• PD2285DF_MT6886_EX_A_13.0.9.2.W30.V000L1_171023_MXML.zip

PD2285CF:

• PD2285CF_MT6886_EX_A_13.0.9.2.W30.V000L1_171023_MXML.zip

PD2285F:

• PD2285F_MT6886_EX_A_13.0.10.3.W30.V000L1_221223_MXML.zip

PD2285BF:

• PD2285BF_MT6886_EX_A_13.0.9.2.W30.V000L1_171023_MXML.zip

HOW TO

• Driver & tools: QPST_2.7.496.1.zip (60.31M) | OneDrive | MediaFire | Backup

Step 1: Download and install the Driver and Tool above. Then open QPST tool in Start Menu or from the folder C:\Program Files\Qualcomm\QPST\bin

Step 2: Turn off the phone (Remove the battery if possible, then reinsert the battery), hold the VOLUME UP key and plug in the USB cable to connect to the computer (to enter EDL mode).

Step 3 : Open QPST Configuration

Step 4 : After opening QPST Configuration , select the “ Port ” tab and select the Port the phone is connecting to.

Step 5 : On the menu bar, select Start Clients > Software Download

Step 6 : The QPST Software Download window appears.

Step 7 : Click on the “ Browse… ” button in the Phone Image section and find the file (.hex) in the ROM folder (unzipped)

Step 8 : Continue to click the “ Browse… ” button in the Boot Image section and find the “ BOOT_LOADER.HEX ” file (in the ROM folder).

Step 9 : Start the ROM flash process by clicking the “ Start ” button

Step 10 : When the “green bar” appears below, the ROM flashing process is complete.

Disconnect your phone from your computer and open it to see the results. Thanks