The display features an IPS LCD 6.58 inches screen that comes with a 401 PPI density. The smartphone is powered by MediaTek MT6833P Dimensity 810 Octa-core processor.
It is packed with 8 GB RAM with 128 GB and 256 GB internal storage option. The smartphone runs on Android 12 + Funtouch 12 operating system. The smartphone features a dual camera on the rear side that consists of 50 MP (wide) + 2 MP (macro) while on the front there is a single camera of 16 MP (wide).

The device is fueled with a non-removable Li-Po 5000 mAh battery + Fast charging 18W that comes in various color options such as Glowing galaxy and Starlight black. The dimension of the device is 164 x 75.8 x 8.3 mm and it weighs 194 grams.
vivo Y77 features a headphone Jack, A-GPS, GLONASS, GALILEO, BDS, QZSS, and sensors such as side-mounted fingerprint, accelerometer, proximity, and compass. The dimension of the smartphone is 164 x 75.8 x 8.3 mm and it weighs 193 grams.
Stock ROM for Vivo Y77 5G (PD2224F / PD2224IF / PD2224HF / PD2224GF)
DOWNLOAD:
PD2224F:
PD2224IF:
PD2224HF::
PD2224GF:
OW TO
- Driver & tools: QPST_2.7.496.1.zip (60.31M) | OneDrive | MediaFire | Backup
Step 1: Download and install the Driver and Tool above. Then open QPST tool in Start Menu or from the folder C:\Program Files\Qualcomm\QPST\bin

Step 2: Turn off the phone (Remove the battery if possible, then reinsert the battery), hold the VOLUME UP key and plug in the USB cable to connect to the computer (to enter EDL mode).

Step 3 : Open QPST Configuration

Step 4 : After opening QPST Configuration , select the “ Port ” tab and select the Port the phone is connecting to.


Step 5 : On the menu bar, select Start Clients > Software Download

Step 6 : The QPST Software Download window appears.

Step 7 : Click on the “ Browse… ” button in the Phone Image section and find the file (.hex) in the ROM folder (unzipped)

Step 8 : Continue to click the “ Browse… ” button in the Boot Image section and find the “ BOOT_LOADER.HEX ” file (in the ROM folder).

Step 9 : Start the ROM flash process by clicking the “ Start ” button

Step 10 : When the “green bar” appears below, the ROM flashing process is complete.

Disconnect your phone from your computer and open it to see the results. Thanks