
Here you can download the latest official Stock ROM (Firmware) files for the Rom Sony Xperia XZ2 Compact Dual H8324. These files are essential for repairing software issues, fixing bootloops, upgrading/downgrading the OS, or restoring your device to its factory state.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | H8324 | Global / General | – | Google Drive | AFH | DropBox | Google Drive |
| Stock ROM | H8324 | Global / General | – | Google Drive | AFH | DropBox | Google Drive |
| Stock ROM | H8324 | Global / General | – | Google Drive | AFH | DropBox | Google Drive |
| Stock ROM | H8324 | Global / General | – | Google Drive | AFH | DropBox | Google Drive |
| Stock ROM | H8324 | Global / General | – | Google Drive | AFH | DropBox | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Sony device using Newflasher, follow these steps:
- Download the official firmware for your device (usually using XperiFirm) and extract it.
- Download the latest version of Newflasher tool.
- Copy and extract the Newflasher files directly into the extracted firmware directory (where
bootfolder and.sinfiles are located). - Power off your device completely. Hold the Volume Down button and connect the USB cable to the computer. The LED indicator should turn Green (Flash Mode).
- Double-click
newflasher.exeto launch the tool. - Follow the command-line prompts (type
nto skip optional dumps/reboots when asked). - Press Enter when the flashing process is completed, disconnect your device, and power it on.








