The smartphone comes with a 6.6 inches IPS LCD capacitive touchscreen and 720 x 1600 pixels resolution. The rear camera consists of 13 MP (wide) + Unspecified secondary camera lenses that allow you to enable Dual-LED flash.
The front camera has an 8 MP (wide) sensor with a LED flash. The sensors available in the device include rear-mounted fingerprint, accelerometer, and proximity. The smartphone is fueled by a non-removable Li-Ion 5000 mAh battery.
The phone runs on Android 12 + HIOS 8.6 operating system. Tecno Spark 9 comes in different colors such as Infinity Black and Sky Mirror. It features Type-C 2.0, USB On-The-Go, FM radio, GPS, and Bluetooth.
The device is packed with 3 GB, 4 GB, 6 GB RAM with 64 GB and 128 GB internal storage. It is powered by Mediatek MT6765V/CB Helio G37 processor and the GPU is PowerVR GE8320. The dimension of the smartphone is 164.6 x 76 x 9 mm.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
| Stock ROM | Stock ROM | Global / General | – | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
