INFINIXROM / FIRMWARE

Stock ROM for Infinix Zero 8i (X687B)

The Infinix Zero 8i features a 6.85-inch Full HD+ display with a 180 Hz touch sampling rate and a 90 Hz refresh rate. Powering the phone is the MediaTek Helio G90T processor, paired with 8 GB of RAM and 128 GB of internal storage.

The biggest difference between the Zero 8i and the Zero 8 lies in the camera setup. The Zero 8i is equipped with a quad-camera system on the rear, consisting of a 48 MP main sensor, an 8 MP ultra-wide lens, a 2 MP depth sensor, and a 2 MP additional sensor. On the front, it houses a dual selfie camera setup with a 16 MP primary lens and an 8 MP secondary lens.

Additionally, the device comes with a 4,500 mAh battery that supports 33W fast charging. It also boasts features like 10-layer cooling technology, TÜV Rheinland certification for high-performance gaming, and Smart Turbo V1.0 technology.

Prerequisites & Preparation

  • Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
  • Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
  • USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

File TypeFirmware / BuildRegion / ModelOS VersionDownload Link
Stock ROMInfinix-Zero-8i-X678B-H894Q-U-RU-240815V763.zipGlobal / GeneralGoogle Drive | OneDrive | Backup
Stock ROMInfinix-Zero-8i-X678B-H894OPQ-U-OP-240815V762.zipGlobal / GeneralGoogle Drive | OneDrive | Backup
Stock ROMInfinix-Zero-8i-X678B-H894OPQ-U-OP-240703V753.zipGlobal / GeneralGoogle Drive | OneDrive | Backup
Stock ROMInfinix-Zero-8i-X678B-H894Q-U-RU-240701V750.zipGlobal / GeneralGoogle Drive | OneDrive | Backup
Stock ROMInfinix-Zero-8i-X678B-H894OPQ-U-OP-240618V711.zipGlobal / GeneralGoogle Drive | OneDrive | Backup
Stock ROMInfinix-Zero-8i-X678B-H894Q-U-RU-240506V533.zipGlobal / GeneralGoogle Drive | OneDrive | Backup

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Infinix device using SP Flash Tool, follow these steps:

  1. Download and install the MTK USB Drivers on your computer.
  2. Download and extract the SP Flash Tool.
  3. Launch Flash_tool.exe as administrator.
  4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
  5. Click the Download button.
  6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
  7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.

You may also like

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted