The smartphone is powered by Mediatek Dimensity 7050 Octa-core processor with Mali-G68 MC4 GPU. The device runs on Android 14 + ColorOS 14 operating system.
The device is packed with 8 GB, 12 GB RAM with 256 GB, 512 GB internal storage. It features IP69 dust/water resistance (up to 1.5m for 30 min) and supports Dual SIM (Nano-SIM, dual stand-by).
Oppo A3 Pro consists of a dual-camera setup: 64 MP (wide) + 2 MP (depth). On the front, there is an 8 MP (wide) camera for clicking selfies. The size of the display is 6.7 inches AMOLED while the screen resolution is 1080 x 2412 pixels. The dimension of the smartphone is 162.7 x 74.3 x 7.5 mm and it weighs 177 grams.
It supports Dual SIM (Nano-SIM, dual stand-by) and is fueled with Li-Po 5000 mAh battery + 67W wired, PD, 56% in 20 min (advertised) + Reverse wired. The device comes in three colors including Blue, Pink, and Mint. The sensors include an under display, optical fingerprint, accelerometer, gyro, proximity, and compass.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | CPH2665 | Global / General | Android 11 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your OPPO device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
