The device measures 162.8 x 74.9 x 7.6/7.8 mm and weighs 179/182 g, featuring a sleek design. It is IP68/IP69 dust and water-resistant (up to 1.5m for 30 min) and MIL-STD-810H compliant, ensuring durability. It boasts a 6.77-inch OLED display with a 120Hz refresh rate, 1B colors, and a peak brightness of 4500 nits.
The screen offers a resolution of 1080 x 2392 pixels (~388 ppi) and an impressive ~90.9% screen-to-body ratio. Running on Android 15 with Realme UI 6.0, Realme 14 Pro is powered by the MediaTek Dimensity 7300 Energy (4nm) chipset, paired with an octa-core CPU and Mali-G615 MC2 GPU. It comes with 128GB/8GB RAM, 256GB/8GB RAM, or 256GB/12GB RAM storage options, without expandable memory.
The dual rear camera setup features a 50 MP primary sensor with OIS and a 2 MP depth sensor, supporting 4K@30fps and 1080p@120fps video with gyro-EIS. The 16 MP front camera supports 1080p video. Other features include stereo speakers, Bluetooth 5.4, Wi-Fi 6, NFC, and USB-C 2.0.
The 6000 mAh Si/C Li-Ion battery supports 45W wired charging, reaching 50% in 36 minutes. Available in Pearl White, Jaipur Pink, and Suede Grey colors.
Prerequisites & Preparation
- Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
- Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
- USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).
CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.
Download Stock ROM & Firmware
Global / General
| File Type | Firmware / Build | Region / Model | OS Version | Download Link |
|---|---|---|---|---|
| Stock ROM | RMX5057 | Global / General | Android 14 | Google Drive |
| Stock ROM | RMX5050 | Global / General | Android 14 | Google Drive |
How to Flash Firmware / Stock ROM
To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:
- Download and install the MTK USB Drivers on your computer.
- Download and extract the SP Flash Tool.
- Launch
Flash_tool.exeas administrator. - Click on the Scatter-loading button and select the Android scatter file (
.txt) from the extracted firmware folder. - Click the Download button.
- Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
- The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.
