Stock ROM for Realme C75 (RMX3941)

The Realme C75 is a robust smartphone designed with durability in mind. It has dimensions of 165.7 x 76.2 x 8 mm and weighs 196 g, making it fairly lightweight for a device with rugged features. The phone is IP68/IP69 dust and water-resistant, offering protection up to 1.5 meters for 30 minutes.

It also meets MIL-STD-810H military standards for durability, though it is not guaranteed for extreme conditions. The device is powered by Android 14 with Realme UI 5.0, and features a MediaTek Helio G92 Max chipset with an octa-core 2.0 GHz CPU, offering smooth performance.

The C75’s 6.72-inch IPS LCD offers a resolution of 1080 x 2400 pixels, providing vibrant visuals with a 90Hz refresh rate, 580 nits typical brightness, and 690 nits peak brightness in high-brightness mode. It comes with a dual rear camera setup: a 50 MP wide lens with PDAF and an unspecified secondary camera.

The front camera is 8 MP, capable of 1080p video recording. The phone is equipped with a large 6000 mAh battery, supports 45W wired charging, and features dual stereo speakers. Storage options include 128GB with 8GB RAM or 256GB with 8GB RAM, with the added flexibility of a dedicated microSDXC slot. Connectivity features include Wi-Fi 6, Bluetooth 5.0, and USB Type-C 2.0.

Prerequisites & Preparation

• Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
• Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
• USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:

1. Download and install the MTK USB Drivers on your computer.
2. Download and extract the SP Flash Tool.
3. Launch Flash_tool.exe as administrator.
4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
5. Click the Download button.
6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.

Video Guide / Reference