Stock ROM for Realme Narzo 80 Pro 5G (RMX5033)

The Android v15 smartphone features a slim 7.55mm design and a lightweight 179g build, equipped with an in-display fingerprint sensor for seamless unlocking. It sports a 6.74-inch AMOLED display with a 1080×2400 pixel resolution (390 ppi density). The screen supports an impressive 4500 nits brightness, 3840Hz PMW dimming, and a 2500Hz instant touch sampling rate.

With a 144Hz refresh rate and a punch-hole design, the display offers a smooth and immersive experience. The triple rear camera setup includes a 50 MP primary sensor with OIS, a 32 MP secondary sensor, and an 8 MP lens, supporting 4K UHD video recording. The 32 MP front camera ensures high-quality selfies and video calls.

Powered by the MediaTek Dimensity 7400 chipset and an octa-core processor, Realme Narzo 80 Pro 5G features 8GB RAM + 8GB virtual RAM for enhanced multitasking. It offers 256GB internal storage, expandable via a hybrid microSD card slot (up to 1TB).

Connectivity includes 4G, 5G, VoLTE, Bluetooth v5.4, WiFi, and USB-C v2.0. The 6000mAh battery supports 80W SuperVOOC fast charging. However, the phone lacks FM Radio and water resistance, making it more suitable for everyday use than extreme conditions.

Prerequisites & Preparation

• Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
• Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
• USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Realme device using SP Flash Tool, follow these steps:

1. Download and install the MTK USB Drivers on your computer.
2. Download and extract the SP Flash Tool.
3. Launch Flash_tool.exe as administrator.
4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
5. Click the Download button.
6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.

Video Guide / Reference