OTHERROM / FIRMWARE

Stock ROM / Firmware for Tecno Phantom X Pro (AC8)

The display size is 6.7 inches Super AMOLED capacitive touchscreen and gives you a 1080 x 2340 pixels resolution. The smartphone consists of a triple-camera including 50 MP (wide) + 13 MP (telephoto) + 8 MP (ultrawide) camera.

On the front, there is a 48 MP + 8 MP (ultrawide) camera. The sensors of the smartphone include a Fingerprint (under display, optical), accelerometer, gyro, and proximity. The smartphone is fueled by a Non-removable Li-Po 4700 mAh battery + Fast charging 33W, 70% in 30 min (advertised).

Tecno Phantom X is pack with 8 GB RAM and 256 GB internal storage. The device features Bluetooth 5.0, FM Radio, GPS, and micro USB 2.0, USB On-The-Go. The dimension of the device is 163.5 x 73.8 x 8.7 mm and it runs on the Android 11 + HIOS 7.6 operating system.

The smartphone is available in colors such as Starry Night Blue and Monet Summer. It runs on a MediaTek Helio G95 Octa-core processor while the GPU is Mali-G76 MC4.

Prerequisites & Preparation

  • Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
  • Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
  • USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

File TypeFirmware / BuildRegion / ModelOS VersionDownload Link
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive
Stock ROMStock ROMGlobal / General–Google Drive

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:

  1. Download and install the MTK USB Drivers on your computer.
  2. Download and extract the SP Flash Tool.
  3. Launch Flash_tool.exe as administrator.
  4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
  5. Click the Download button.
  6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
  7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.

You may also like

Subscribe
Notify of
guest

0 Comments
Newest
Oldest Most Voted