Stock ROM / Firmware for Tecno Spark Go Plus (BB4K)

Tecno Spark Go Plus mobile was launched on 9th January 2020. The phone comes with a 6.52-inch touchscreen display offering a resolution of (720×1600 pixels and an aspect ratio of 20:9. Tecno Spark Go Plus is powered by a 2GHz quad-core MediaTek Helio A22 (MT6761) processor. It comes with 2GB of RAM. The Tecno Spark Go Plus runs Android 9 Pie and is powered by a 4000mAh battery.

As far as the cameras are concerned, the Tecno Spark Go Plus on the rear packs an 8-megapixel camera with an f/2.0 aperture. It sports an 8-megapixel camera on the front for selfies with an f/2.0 aperture.

The Tecno Spark Go Plus runs HiOS 5.5.2 is based on Android 9 Pie and packs 32GB of inbuilt storage that can be expanded via microSD card (up to 128GB) with a dedicated slot. The Tecno Spark Go Plus is a dual-SIM (GSM and GSM) mobile that accepts Nano-SIM and Nano-SIM cards. The Tecno Spark Go Plus measures 166.70 x 75.80 x 8.40mm (height x width x thickness) . It was launched in Hillier Purple and Vacation Blue colours.

Connectivity options on the Tecno Spark Go Plus include Wi-Fi, GPS, Bluetooth v4.20, 3G, and 4G. Sensors on the phone include accelerometer, ambient light sensor, proximity sensor, and fingerprint sensor. The Tecno Spark Go Plus supports face unlock.

Prerequisites & Preparation

• Backup Data: Flashing will completely wipe all data on your device. Back up important files and settings before proceeding.
• Battery Level: Ensure your device has at least 50% battery to prevent shutdown during the flashing process.
• USB Driver & Tools: Install the correct USB drivers for your brand and prepare the flashing tool (Odin for Samsung, SP Flash Tool/QPST for Qualcomm/MTK, etc.).

CAUTION: Flashing official firmware carries a risk of bricking your device. Proceed with caution and at your own risk. addROM is not responsible for any damage caused to your device.

Download Stock ROM & Firmware

Global / General

How to Flash Firmware / Stock ROM

To flash the stock firmware on your Tecno device using SP Flash Tool, follow these steps:

1. Download and install the MTK USB Drivers on your computer.
2. Download and extract the SP Flash Tool.
3. Launch Flash_tool.exe as administrator.
4. Click on the Scatter-loading button and select the Android scatter file (.txt) from the extracted firmware folder.
5. Click the Download button.
6. Power off your device completely, hold the Volume Down or Volume Up button, and connect it to the computer via USB cable.
7. The flashing process will start automatically. Wait for the green “Download OK” checkmark to appear.